Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateWhy North Las Vegas Homeowners Choose CGI Windows & Doors
Lightwell Windows & Doors North Las Vegas provides independent CGI windows and doors service across the city: diagnosis, OEM-compatible parts, warranty-safe repair, and full-frame replacement when repair stops making sense. What makes our CGI work different is that we’re not tied to the factory, so we can recommend the cheapest honest fix for the specific generation of CGI window on your home instead of a new unit by default. Our technicians have up to 16 years of experience with CGI vinyl extrusions, impact glazing, and hardware quirks. We are not affiliated with or authorized by CGI; we’re an independent service provider. Call (877) 317-4920 for a free estimate.
Why Trust Lightwell Windows & Doors North Las Vegas for Your CGI Windows & Doors?
CGI products show up on a lot of walls in North Las Vegas, and our technicians have worked on enough of them to know which fit the fix. Series 1200 single-hungs, Series 5000 impact units, horizontal rollers, and vinyl sliders each wear out in their own way, and the right answer depends on the generation you have, not on a brand script.
That matters for parts. Usually an OEM CGI balance, roller, weatherstrip profile, or glazing gasket is the correct match, and we’ll chase one down when the window generation is still supported. When the original part is discontinued or back-ordered for months, we match it with a quality aftermarket equivalent that meets or exceeds the original spec instead of leaving the window stuck and unusable.
Warranty-safe work is the other half. We document what we find before touching anything, keep the original frame and sash intact when a component swap will do, and avoid anything that would plausibly void a manufacturer warranty without telling you first. Written price before any work starts, every time. If the finished work isn’t right, the 365-Day Done Right Promise covers it.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Common CGI Windows & Doors Problems We Fix in North Las Vegas
The problems below are what we actually encounter on CGI products in North Las Vegas, roughly in order of how often they show up on a service call.
- Vinyl frame and sash warping in extreme heat. CGI vinyl extrusions are engineered for a range of climates, but summer after summer at 105 – 115°F stresses them in ways cooler markets don’t test. When a sash bows, gaps open between sash and frame, and you get air infiltration and dust you can’t keep out. Warping that’s slight is fixable with hardware; warping across the whole sash usually isn’t.
- Degraded weatherstripping and glazing seals. The felt and bulb weatherstrip on CGI windows dries and compresses in desert UV. Once it does, wind-driven grit finds the gap and works into the frame cavity. In North Las Vegas this happens sooner than owners expect because the same spring gusts that carry dust off I-15 push it straight into the tracks.
- Impact-glass edge seal failure and delamination. Older CGI impact units often show a hazy, whitish border along the glass edge. That’s laminated-glass edge seal failure, driven by UV and heat cycles. The glass isn’t shattered and it isn’t dangerous, but the clarity is gone for good and the draft starts soon after.
- Roller and balance failure on sliders and single-hungs. CGI Series 3000 and 3500 horizontal rollers and Series 1200 sash balances wear with grit in the track. The symptom is a sash that sticks, jumps the track, or won’t stay up. Usually the window is fine. The moving parts aren’t.
- Blocked weep holes and pooling drainage. CGI vinyl frames drain through small weep holes that dust and debris plug over time. Once they clog, water pools in the sill and frame, then stains and eventually degrades the seal. Here the fix is often maintenance, not repair.
One pattern worth naming: the tumbleweed season. Spring wind events in North Las Vegas blow in whole tumbleweeds along with fine grit, and that grit lodges in door sweeps, roller tracks, and slider channels. Homes here need their CGI door hardware and window tracks cleaned and resealed far more often than the same windows in Henderson or Summerlin.
CGI Parts & Our Repair-vs-Replace Approach
For a still-supported CGI window generation with a sound frame, we source OEM parts: sash balances, rollers, weatherstrip profiles, and glazing gaskets made to the original spec. When the part is discontinued, we match a high-quality aftermarket equivalent that meets or exceeds the original. We don’t claim to stock CGI parts locally; parts are sourced per job and confirmed with you before ordering, so the timeline is honest up front.
The repair-or-replace decision comes down to three things: how much of the window has failed, whether the vinyl extrusion is still straight, and whether the seal is compromised across one pane or all of them. A single failed balance, roller, or gasket is a repair. A warped extrusion, compromised seals on several panes, or a first-generation CGI impact unit past its service life is a replacement, and we’ll say so plainly. A written price comes before any work starts, whether the job is a $200 balance-and-roller swap or a full-frame install. Call (877) 317-4920 and we’ll walk your specific windows through that decision.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We identify the CGI model family and generation, then check the failure at the glass, the gasket, the hardware, and the frame extrusion separately. What we find goes in writing, including photos of the failing component.
- 2
Repair or install. For a component fix, we swap the CGI balance, roller, weatherstrip, or gasket and clean and lube the track. For a replacement, we set the new unit to the existing opening, seal and weatherstrip it to a standard that handles wind-driven grit, and confirm drainage at the weep holes.
- 3
Test. We operate every sash and panel across its full travel, check the lock and latch alignment, run water at the sill, and look for gaps at the frame. Nothing leaves as done until it opens, closes, and seals the way it should.
- 4
Warranty and clean-up. The 365-Day Done Right Promise is stamped on the job. Shoe covers and drop cloths are on every visit, and you get a photo of the clean-up before the crew leaves.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in North Las Vegas
We service and install CGI Series 1200 single-hung vinyl windows, CGI Series 5000 impact-resistant vinyl windows, CGI horizontal roller windows in the Series 3000 and 3500 families, and CGI vinyl sliding glass and French doors. That covers the three sub-services most North Las Vegas owners need: vinyl replacement windows for end-of-life units, impact-resistant windows for west-facing rooms that take the worst of the summer sun, and window maintenance and care that keeps tracks, weep holes, and weatherstrip working between bigger jobs. If you’re unsure of your series, the label on the sash or a photo of the frame corner is usually enough for us to identify it.
We Also Service These Brands
CGI isn’t the only brand on our service list. We also work on PGT, CWS, ES Windows, and ECO Window Systems, along with Mr-Glass, Therma-Tru, and ViewLux for doors and glazing. Eight manufacturer brands means the recommendation is built around your home and your budget, not around the installer’s preferred vendor.
FAQs – CGI Windows & Doors Service in North Las Vegas
No. We are an independent CGI service provider, not affiliated with or authorized by the manufacturer. That independence is the point: it lets us recommend the most cost-effective fix for the specific generation of CGI window or door on your home instead of defaulting to a factory replacement. Call (877) 317-4920 to talk through your windows with a live person, any hour.
Yes, whenever the window generation is still supported and the frame is structurally sound. We order OEM CGI balances, rollers, weatherstrip profiles, and glazing gaskets per job for the correct match. When the OEM part is discontinued, we use a quality aftermarket equivalent that meets or exceeds the original spec, and we tell you which route we’re taking before ordering. Call (877) 317-4920 for a written parts and labor price.
A single component repair, such as a balance, roller, or weatherstrip swap, is usually a same-visit job once the part is on hand. Full-frame replacement takes longer because it’s scheduled around the unit and the opening, and we’ll give you a realistic timeline in the written estimate rather than a guess. Call (877) 317-4920 and we’ll scope it for your CGI windows.
We cover the CGI Series 1200 single-hung vinyl window, the Series 5000 impact-resistant vinyl window, CGI horizontal roller windows in the Series 3000 and 3500 families, and CGI vinyl sliding glass and French doors. If your label is faded or missing, a photo of the frame corner usually identifies the series. Call (877) 317-4920 with the photo and we’ll confirm.
Not if it’s done correctly. Component swaps that keep the original frame and sash intact are the warranty-safe route, and we check the manufacturer terms that apply to your window generation before starting. We tell you when a repair might affect coverage, and you decide with that in writing. Call (877) 317-4920 to review your specific unit.
CGI repair and replacement in North Las Vegas generally runs from around $185 to $320 for a single component repair (balance, roller, weatherstripping, or glazing gasket) up to roughly $650 to $1,300 per opening for an impact-resistant replacement window, with full-frame installs at the higher end. A cloudy edge on a CGI Series 5000 impact pane often means replacing just the insulated glass unit and re-gasketing the sash, which costs far less than a whole window. Exact pricing depends on series, size, glass package, and access. Call (877) 317-4920 for an exact quote, estimates are free.
Book Your CGI Service in North Las Vegas, NV
If your CGI windows or doors are sticking, fogging at the edge, leaking dust, or draining poorly, we can tell you what’s worth repairing and what isn’t. Written price before any work starts, background-checked technicians, and a live person on the phone 24/7. Call (877) 317-4920 to schedule your free estimate in North Las Vegas.
Written by the team at Lightwell Windows & Doors North Las Vegas.
Six Reasons Homeowners Choose Lightwell Windows & Doors North Las Vegas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.