Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimatePGT Impact Garage Doors: The North Las Vegas Owner’s Guide
We install PGT-compatible and PGT-spec impact garage doors in North Las Vegas, and most full replacement projects run $2,400 to $6,800 installed depending on door size, wind-load rating, and whether the existing track and springs are reused. Because these are ordered and fitted to your opening, plan on a scheduled installation rather than a same-day swap. Most North Las Vegas homeowners discover the problem the same way: a door that shudders on the way down, a visible bow in the panel after a wind event, or a gap at the bottom that lets in our spring dust.
Impact-rated garage doors are different from the standard door most people picture. The panels are heavier, the reinforcement is real, and the hardware has to match that weight. When one piece gives out, the whole assembly tells you.
Which PGT Models This Applies To
PGT builds impact products across several lines, and the garage-door side shares hardware DNA with their window and door systems: specific extrusion profiles, specific anchor spacing, and specific rating labels. The practical starting point is the label. PGT stamps a rating plate or affixes a sticker inside the jamb or on the door’s inner face, and that label carries the model designation and the design pressure (DP) rating your home was permitted under. Write those numbers down before you call anyone, including us.
If the label is gone, the measurements decide it. Panel thickness, stile width, and the distance between hinge points separate one generation of PGT-compatible door from another, and a door built for a 7-foot opening won’t accept hardware sized for an 8-foot one. Impact doors also carry a heavier bottom section, so the bottom bracket and roller carriers are specific to the impact line.
On the OEM-versus-aftermarket question, we’ll give you the honest version. Genuine PGT replacement sections keep the original rating intact and match the profile exactly. Quality aftermarket equivalents can work well for rollers, hinges, and weather seal, and they cost less. For structural sections and anchor hardware on an impact door, we steer toward the OEM part. Here’s the compatibility gotcha worth knowing: PGT impact door hardware is not interchangeable with standard non-impact hardware of the same nominal size. The hinge leaves are thicker and the screw pattern differs, so a “same size” swap from a big-box bin will not seat correctly. Lightwell Windows & Doors North Las Vegas is an independent service provider and is not affiliated with PGT.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your PGT Impact Garage Doors Is Failing
Impact doors in North Las Vegas live a harder life than most. Summer surface temperatures on a west-facing aluminum door can climb past 160°F, and the UV load breaks down weather seal and lubricant faster than in milder climates. Add the fine dust that blows through the valley and you get wear patterns you won’t see in a coastal installation. Here’s what to watch for:
- The door shudders or jerks on the way down. Usually a worn roller or a hinge that’s lost its lubrication and started to bind. The impact door’s extra weight makes a small bind feel like a big one.
- A visible gap at the bottom after the door closes. The bottom seal has compressed or torn. In North Las Vegas this happens faster because heat softens the seal and dust grinds it away.
- One panel sits proud of the others. A bent stile or a pulled anchor. On an impact door, this one matters. The panel alignment is part of what holds the rating.
- The door won’t stay balanced when you release the opener. A sign the springs are losing tension. We’ll come back to this one in the safety section.
- Rust or white corrosion at the hinges and bottom brackets. Even in the desert, irrigation overspray and monsoon humidity find the hardware. Corrosion eats the screw threads first.
If you’re seeing more than one of these, the parts have probably been failing together for a while. That’s normal. They wear as a system.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what North Las Vegas homeowners actually pay, with the caveat that every opening is different:
- Full PGT-compatible impact door replacement: $2,400 to $6,800 installed, depending on size and rating.
- Individual section or panel replacement: $340 to $900 per section.
- Bottom seal and retainer replacement: $140 to $280.
- Hinge, roller, and bracket set: $180 to $420.
- Spring replacement: $260 to $520, which we quote separately because it’s a safety-critical job.
The range comes down to door size, the DP rating your home requires, whether the track survives, and whether the opener needs recalibration for the new weight. Every quote we write is line-item, in writing, before anything is touched. No change-order surprise at the end of the day. Every installation is covered by our 365-Day Done Right Promise: if it isn’t right, we make it right. Shoe covers and drop cloths go down before the crew starts, and we send you a photo of the clean-up before we leave.
DIY or Call Us?
Some of this is safe to check yourself. Walk the door and listen. Look at the bottom seal for tears. Wipe the hinges clean and look for corrosion. Check that the photo-eye sensors are aligned and the door reverses when you wave something through the beam. Those checks cost nothing and tell you a lot.
Two things we won’t tell you to do yourself. Torsion springs and the cables that tension them are under extreme load, and a spring that lets go can cause serious injury. This is not a “watch a video and try it” job. If your door won’t balance or you hear a bang from the header, stop using the door and call us. Same for replacing structural impact panels, because the anchor torque and alignment are what preserve the rating. Our technicians have up to 16 years of experience with impact hardware, and they’re background-checked and uniformed so you know who’s at your door. Call (877) 317-4920 for a free written estimate.
FAQs
Expect 12 to 20 years for the door itself and 7 to 12 years for the springs, with the shorter end more likely on a west- or south-facing door. North Las Vegas heat and UV accelerate seal and lubricant breakdown, so annual hardware checks stretch the lifespan considerably. Call (877) 317-4920 for an exact quote on your door.
Often yes. Hinges, rollers, bottom seals, and brackets are all repairable and worth repairing. A cracked or bent structural impact panel usually needs replacement because the rating depends on the section’s integrity. We’ll tell you which one you’re facing before any work starts.
Hardware and seal replacements take one to two hours. A full door replacement takes most of a day, sometimes into a second day for larger openings or if the track has to be reset. We give you a time window when we schedule, and we respect your family’s quiet hours.
We match the model and DP rating from your door’s label or from measured dimensions, then order from the correct supply line. We don’t claim to stock parts or carry them on a truck. We carry eight manufacturer brands, PGT chief among them, along with CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, and that range lets us recommend what fits your home rather than what’s convenient for us. Part of the Cedarwell network since 2010, and a live person answers our phone 24/7. Call (877) 317-4920 to schedule your free estimate.
Written by the team at Lightwell Windows & Doors North Las Vegas, serving North Las Vegas and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows & Doors North Las Vegas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.