Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Window Installation in North Las Vegas: What to Know First
We install CGI windows in North Las Vegas, and for most standard homes the job runs one to three days once the product is on site. Pricing depends on series, glass package, and opening count more than anything else – double hung replacements commonly land between $450 and $900 per opening fully installed, and we put that number in writing before anyone touches your walls. This page is for North Las Vegas homeowners whose homes already have CGI units or who’ve chosen CGI product and want it installed by a crew that knows what these windows do in desert heat.
CGI is a Florida-based manufacturer with a broad product line, and its windows show up in a lot of Southern Nevada homes built or updated in the last two decades. We work on them regularly. Call (877) 317-4920 for a free estimate.
Key Takeaways
- CGI installation in North Las Vegas typically takes one to three days for a full-home job.
- We’re an independent CGI service provider – not affiliated with or authorized by the manufacturer.
- Every job gets a written price before work starts, and the 365-Day Done Right Promise covers the finished install.
- CGI single hung, horizontal roller, 3-lite roller, casement, awning, and picture windows are all in our wheelhouse.
How CGI Products Fail – and How We Fix Them
CGI windows are built for humid, coastal climates, and North Las Vegas is the opposite: single-digit humidity, summer afternoons above 110°F, and intense ultraviolet load. That mismatch drives the failures we see most.
- Seal and glazing failure on CGI single hung units. The butyl and silicone seals around insulated glass units take a beating when a window’s exterior surface swings fifty degrees between a July afternoon and an overnight low. When the seal fails, the desiccant saturates and the glass fogs from the inside. We test for it before ordering glass, and we specify a sealant rated for high-UV desert exposure on the reinstall.
- Roller and track wear on CGI horizontal roller and 3-lite roller windows. Fine desert dust gets into the bottom track and grinds at the nylon rollers until panels drag or jump the track. Homeowners often assume the window is finished. Usually it’s a roller and track-cleaning job – we replace rollers with OEM or quality aftermarket parts and adjust the track so the panel glides again.
- Frame distortion and sash binding from heat. Vinyl CGI frames expand measurably on a sun-baked west-facing wall. If the original install left too little clearance or over-tightened the frame screws, the sash binds and the lock won’t line up by late afternoon. Our fix is to correct the shimming and clearance, not to force the sash – forcing it cracks the frame weld.
- Weep and drainage issues on casement and awning units. CGI casement and awning windows rely on weep slots to shed water. North Las Vegas gets hard monsoon bursts, and if the weep path is blocked by stucco or caulk, water backs into the wall. We clear the drainage path and reflash the opening properly.
- Failed weatherstripping on older CGI picture and fixed windows in North Las Vegas homes. The felt and foam weatherstripping around CGI fixed and picture windows hardens and crumbles in the dry air. It’s a small part with a big effect on air infiltration. We replace it with UV-stable weatherstripping during the install.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Window Installation Process
- 1
Diagnose first. We measure every opening, check the existing frame for rot, and confirm what the wall assembly will accept. We photograph the interior before we start so nothing gets moved without your okay.
- 2
Decide OEM versus quality aftermarket parts. Some CGI parts must be OEM to protect the warranty. Others have a quality aftermarket equivalent that costs less and performs the same. We tell you which is which and why – the call is yours.
- 3
Protect the home. Shoe covers and drop cloths go down before anything comes through the door. We follow our C.A.R.E. values: clean up like it’s our own home, ask before we move anything, respect your family’s quiet hours, and explain the price before work starts.
- 4
Install. Frames are shimmed with proper clearance for heat expansion, flashed and sealed with UV-rated sealant, and set plumb and level at every opening.
- 5
Test every unit. Each window gets opened, closed, and locked to confirm the sash moves freely and the hardware lines up. We run a water test on exterior-facing units before we call it done.
- 6
Clean up and photograph. We sweep, wipe, and take a photo of the cleaned space before we leave. You get the photo. The 365-Day Done Right Promise stands behind the finished install.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Window Installation Costs in North Las Vegas
Prices below are installed, including removal and disposal of your old units, and they land where the North Las Vegas market actually sits. Not every opening is standard, so treat them as a starting range:
- CGI single hung or double hung, standard size: $450 to $900 per opening.
- CGI horizontal roller or 3-lite roller: $550 to $1,100 per opening.
- CGI casement or awning: $600 to $1,200 per opening.
- CGI picture or fixed: $400 to $800 per opening.
- Full-home CGI install (8 to 12 windows): $4,500 to $9,500 typical.
What moves the price: tempered or low-E glass packages, second-story openings, custom sizing, and whether the existing frame is sound or needs rebuild. Every job gets a written price before work starts and a free estimate up front – no surprises at the end of the day.
Why North Las Vegas Homeowners Call Lightwell Windows & Doors North Las Vegas for CGI Work
We carry CGI alongside seven other manufacturer brands – PGT, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux – which means the recommendation you get from us fits your home, not our preferred vendor. Our technicians have up to 16 years of experience and know the CGI product line specifically, so a North Las Vegas homeowner with a fogged CGI sash or a binding roller gets a diagnosis, not a sales pitch for a whole-window replacement.
Every job carries the 365-Day Done Right Promise and the Cedarwell Care Promise. Calls are answered by a live person 24/7 – not a voicemail maze. Pricing is written before work starts. And the house gets treated like the family lives in it, because it does.
FAQs
CGI’s manufacturer warranty covers the product itself, and our 365-Day Done Right Promise covers the installation work for a full year – if the finished work isn’t right, we make it right. As an independent CGI service provider we’re not the manufacturer, and some install practices can affect your CGI warranty, which is why we follow CGI’s installation specs exactly on every job.
Most CGI parts are available within days through our supplier network, and we stock or source OEM glass and hardware for common CGI series. Rare parts sometimes need to be built to order, which can run a couple of weeks. We tell you the timeline up front, before you commit.
If the frame and glass are sound and the problem is a roller, seal, or weatherstripping, repair is almost always the right call. If the insulated glass unit is fogged and the sash is warped from heat, replacement of that opening usually makes more sense. We’ll give you both numbers so you can decide.
Once product is on site, most CGI installs take one to three days for a full home. Lead time on the windows themselves depends on the series and size. Your free estimate includes the delivery estimate.
Yes. CGI horizontal roller and 3-lite roller windows are among the most common units we install in North Las Vegas homes, and we keep the rollers, track hardware, and weatherstripping those windows need. Call for an estimate on your specific openings.
Ready to get a written price on CGI window installation for your North Las Vegas home? Call Lightwell Windows & Doors North Las Vegas at (877) 317-4920 for a free estimate.
Written by the team at Lightwell Windows & Doors North Las Vegas, serving North Las Vegas and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows & Doors North Las Vegas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.