Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Door Installation in North Las Vegas: What to Know First
CGI door installation in North Las Vegas usually runs $1,150 to $4,800 per opening depending on door type, size, and whether the existing frame is square and sound. Most single entry doors are templated, fitted, and finished in one day, and we put your written price in front of you before anything is ordered or removed. As an independent CGI service provider, we’re not authorized by or affiliated with CGI.
This page is for homeowners who already have CGI products on the house, or who’ve picked a CGI line from a showroom and now need it installed properly. If that’s you, call Lightwell Windows & Doors North Las Vegas at (877) 317-4920 – a live person answers, day or night.
How CGI Products Fail – and How We Fix Them
CGI builds a solid entry and patio door line, but the failures we see in North Las Vegas aren’t usually the door itself. They’re installation gaps, heat, and dust. Here’s what we run into most on CGI jobs.
- Sticking and dragging on the hinge side after the first summer. Entry doors out of the CGI line that fit easy in spring start rubbing when the slab gains heat on a west-facing wall. It’s not a hinge failure – it’s the install frame moving because the shim and foam setup didn’t leave a thermal break. We reset the frame with proper shims, re-insulate with foam rated for our heat, and rehang the door so the gap is uniform and the latch engages clean.
- Failing perimeter seals and dust infiltration. Our spring wind event season pushes fine grit against exterior doors for days. On CGI storm and exterior doors we regularly see the sweep and threshold gasket wear out long before the door does – the seal gets abraded and chases. We replace the sweep, threshold and weatherstripping as a set, not one piece at a time, because a single new seal against two worn ones just channels water and grit to the next weak point.
- Water staining at the sill on French and double doors. In North Las Vegas, monsoon-driven rain plus sprinkler overspray hits the exposed sill on double doors and can wick under a poorly detailed threshold. The culprit is usually a sill pan that was skipped or a foam line that wasn’t trimmed flush before the threshold cover went on. We pull the threshold, add or repair the pan, and reflash before reinstalling.
- Latch and multi-point hardware drift. Hurricane-rated front and entry doors from CGI use heavier multi-point locking hardware. Over time the strike plate shifts a fraction, and owners report the door “won’t quite close.” We realign the strike, check the lock for wear, and replace OEM hardware only when it’s actually failed – we won’t swap good parts.
- Sagging slab on a poorly anchored frame. Large CGI replacement doors need top-corner anchoring for a reason. When the frame is only screwed at the sides, the top corner opens and the door drops. We check frame square before install, anchor properly for the door’s size, and verify the slab swings true before we seal anything.
The pattern: CGI failures in North Las Vegas are usually installation and heat-and-dust related, not product-defect related. That’s why our techs go through the frame before they touch the door.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Door Installation Process
- 1
Site check and measure. We measure the rough opening, check the existing frame for square, rot, and water damage, and confirm the wall assembly. If the frame is compromised we tell you before ordering a door.
- 2
Parts decision – OEM vs. quality aftermarket. Where a CGI part is under manufacturer warranty we order the OEM part so the warranty stays intact. Where a wear item like the sweep or threshold gasket will just fail again, we offer a quality aftermarket equivalent and tell you the trade-off. The choice is always yours and the price difference is on the quote.
- 3
Written price, then protect the house. Before a single screw comes out, you have a written line-item price. On the day, our background-checked, uniformed technicians put down shoe covers and drop cloths, and ask before moving anything.
- 4
Install the door. Frame set and shimmed, insulated, flashed, threshold and sill pan checked. Pet-safe sealants and caulk used wherever there’s a choice.
- 5
Test and adjust. We open and close the door through its full swing, check the latch, lock and seal contact, and adjust until it closes clean. Then we sweep the loose grit out of the track and along the sill.
- 6
Clean up and show you. Before we leave we take a photo of the cleaned-up work area, walk you through what was done, and hand over the warranty paperwork.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Door Installation Costs in North Las Vegas
Prices vary with door type, size, and how much the frame needs. These are the ranges we typically quote.
| Scenario | Typical Price Range |
|---|---|
| Single CGI entry door, sound frame, standard size | $1,150 – $2,400 |
| CGI hurricane-rated front door, new frame and flashing | $2,600 – $4,400 |
| CGI French / double door, sill pan and threshold work | $2,900 – $4,800 |
| CGI storm / exterior door replacement | $1,400 – $2,800 |
| Frame repair or re-square before install (add-on) | $150 – $450 |
| Sweep, threshold and gasket replacement as a set | $120 – $280 |
What moves the price up: an out-of-square or rotted frame, a larger opening, hurricane-rated hardware, and any structural flashing the house needs. The written price you get before work starts is the price you pay – no add-on at the end.
Call (877) 317-4920 for a free estimate on your specific door. We put the number in writing the same day.
Why North Las Vegas Homeowners Call Lightwell Windows & Doors North Las Vegas for CGI Work
The name Lightwell comes from the architectural light well – the opening that pulls daylight deep into a building. That’s what a well-installed door should do for your entry. Our technicians have up to 16 years of experience, and they know the CGI lines by name and by their North Las Vegas failure patterns – heat, wind grit, and monsoon-driven rain on exposed sills.
Every job is covered by the 365-Day Done Right Promise: if it’s not right, we make it right, no debate and no countdown on the warranty. That’s on top of the Cedarwell Care Promise. You’ll know who’s at your door before they knock – background-checked, uniformed technicians. A live person answers the phone at any hour. And when a CGI part isn’t the right call, we have seven other brands on hand – PGT, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru and ViewLux – so we recommend what fits your home, not what’s easiest for us to sell.
North Las Vegas homeowners have been burned by contractors who moved things without asking and handed over a bigger number at the end. We don’t do that. Written price first. Photo of the clean-up before we leave. That’s the whole job, every time.
FAQs
Yes – we use OEM CGI parts where the door is under warranty, and we document the install so your warranty stays valid. As an independent CGI service provider we’re not authorized by CGI, so if a manufacturer warranty claim is needed we help you file it and follow their process, but the final call is theirs. Call (877) 317-4920 to schedule your free estimate and we’ll walk through the warranty question on your specific door.
Common CGI parts – sweeps, thresholds, gaskets, strike plates – are usually available in days, and OEM hardware that has to be ordered typically arrives in one to three weeks. In the meantime we can install a quality aftermarket wear part so the door seals properly. Call (877) 317-4920 and we’ll confirm lead time for your model.
If the slab, frame and hardware are structurally sound, repair is almost always the cheaper call and we recommend it. A CGI door with a failing multi-point lock, a sagging slab or a rotted frame is usually a replace – patching it just delays the same failure. We measure the frame and check the hardware on the free estimate so the decision is based on the actual door, not a sales pitch.
Most single CGI entry doors are done in one day. A larger French or double door with sill pan and flashing work usually takes a day and a half to two days. We tell you the schedule up front and don’t leave the opening in a state that can’t be secured overnight.
Yes. CGI’s hurricane-rated front, entry and storm door lines are a large part of what we install in North Las Vegas, and they need correct anchoring and flashing to perform. We check the wall assembly and sill pan details before install and test the multi-point hardware after. Call (877) 317-4920 for a free estimate on your CGI storm or entry door.
Ready to move? Call Lightwell Windows & Doors North Las Vegas at (877) 317-4920 for a free estimate. A live person answers 24/7, we put the price in writing before any work starts, and every job is backed by the 365-Day Done Right Promise. We serve North Las Vegas and nearby areas.
Written by the team at Lightwell Windows & Doors North Las Vegas, serving North Las Vegas and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows & Doors North Las Vegas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.