Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Sliding & Patio Doors: The North Las Vegas Owner’s Guide
We install and service CGI-compatible sliding and patio doors, and most full door replacements here run $2,600 to $6,400 installed depending on size, glass package, and frame series. We don’t do same-day door swaps, but we can usually schedule an in-home estimate within a few days, and we answer the phone live 24/7 at (877) 317-4920.
Owners rarely notice a door failing all at once. A patio door tells on itself slowly. The glide gets heavier through summer. A roller starts grinding near the sill. A thin line of daylight shows up along the jamb in July that wasn’t there in March. In North Las Vegas, that summer heat and the dust that rides the evening wind push sliding doors harder than most homeowners realize. By the time the door feels wrong to open, the problem has usually been building for a season or two.
Which CGI Models This Applies To
CGI makes a range of vinyl and aluminum slider profiles sold under several series names, and the hardware is not universal across them. The part you pull off a 3-track slider from one series will not drop into a 2-track frame from another, even when the opening measures the same. Rollers are the most common mismatch: diameter, tread material, and the length of the roller housing all vary between series. Before we quote anything, we check the door tag, usually found embossed on the upper or lower sash or stamped on the track head. If the tag is gone, we take three measurements (opening width, opening height, track depth) and match against the profile. CGI’s own OEM parts fit correctly every time but can cost more and take longer to source. A quality aftermarket roller or weatherstrip is a fair choice for most homeowners in North Las Vegas; we’ll tell you when the OEM part is the only one that will seat properly, and we never pretend a part is original when it isn’t. We’re an independent service provider and are not affiliated with CGI.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CGI Sliding & Patio Doors Is Failing
- Heavy or grinding door glide. Rollers take the load of a 60- to 120-pound panel every time it opens. When the bearing wears or the wheel goes flat, the panel drags and grinds.
- Daylight or draft along the jamb. Weatherstrip and sweep seals shrink in the dry desert heat. A visible daylight line means the seal has lost compression or separated from its channel.
- Water tracking inside after a monsoon storm. Failed sill seals or a leveled track let wind-driven rain climb under the panel. Once water reaches framing, wood rot follows fast in North Las Vegas.
- Door that won’t stay closed or won’t lock cleanly. Worn rollers drop the panel slightly, which misaligns the latch and handle. A lock that fights you is usually a roller problem, not a lock problem.
- Cloudy or hazy glass. A failed insulated glass unit has lost its seal, letting moisture between panes. This won’t leave dust on the floor, but it turns a bright room grey.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most CGI-compatible sliding door replacements in North Las Vegas run $2,600 to $6,400 installed. A standard 6-foot vinyl slider with a basic glass package sits at the low end. A 8-foot or 12-foot multi-panel door with impact-rated or low-E glass, a new threshold, and upgraded rollers pushes toward the top. Here is what we put in writing before any work starts:
| Item | Typical Range |
|---|---|
| Roller / hardware replacement only | $180 – $480 |
| Weatherstrip and sweep seal replacement | $120 – $320 |
| Insulated glass unit (IGU) replacement | $450 – $1,100 |
| Full sliding door replacement (installed) | $2,600 – $6,400 |
Every quote is itemized. You will see the part, the labor, the sealant, and the disposal separately. Permits are pulled where required by the city of North Las Vegas and inspection passed before we call the job done. The work is covered by our 365-Day Done Right Promise: if it isn’t right, we make it right. No invoice surprise, no change order halfway through.
DIY or Call Us?
You can safely do a few things yourself. Clean the track with a vacuum and a dry brush. Lift the door panel (with a helper, ideally) and look at the rollers; if a wheel is cracked or flat rather than round, that’s your culprit. Check the weatherstrip by hand for gaps. What you shouldn’t do is adjust the roller height on a heavy glass panel without help, because a dropped panel can shatter or trap fingers. A sliding glass panel can weigh 100 pounds or more, and a mis-set roller will torque the frame and break the glass edge seal. It’s also easy to strip a roller adjustment screw so the replacement won’t seat. Those are the ways “just a quick fix” turns into a $1,100 glass bill. If the problem is on the panel side rather than the part, calling us is the cheaper path. Our technicians have up to 16 years of experience matching CGI parts to the right model, and we’ll tell you honestly whether the door needs a part or a replacement.
FAQs
Rollers typically last 8 to 12 years in a well-used home, but North Las Vegas heat and dust shorten that; the summer sun on a west-facing slider can push a roller to failure in 6 to 8 years. The dry climate preserves the seals longer than you’d expect but they still shrink and gap before they tear. We can inspect yours and give you a written estimate the same visit.
Often yes. If the frame is sound and the glass is intact, replacing rollers, weatherstrip, or a single glass unit restores the door for far less than a full replacement. Replacement makes more sense when the frame is warped, the threshold is rotted, or the glass is failing across every pane. Call (877) 317-4920 and we’ll tell you which situation you’re in before quoting either option.
Hardware and seal replacement is usually one visit, often under two hours for a single panel. A full glass unit takes longer because we order the exact match and schedule a follow-up install. We don’t promise same-day work on a planned replacement, but we do give you a firm appointment window and a live person on the phone if anything changes.
We match by model tag, series name, and a physical measurement of the roller pocket and track depth, not by the width of the opening alone. When the tag is missing, we bring a set of sample parts to compare on-site. That avoids the wrong part being ordered twice and the trip charge that comes with it.
Call (877) 317-4920 for a free estimate on your CGI sliding door, and we’ll send a specific written price before any work starts. Our crew uses shoe covers and drop cloths on every visit, keeps a quiet window for nap time, uses pet-safe sealants whenever there’s a choice, and sends you a photo of the clean-up before we leave. A light well is the opening that pulls daylight deep into a building, and that’s what a well-fitted sliding door should do for your North Las Vegas home.
Written by the team at Lightwell Windows & Doors North Las Vegas, serving North Las Vegas and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows & Doors North Las Vegas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.