Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCWS Impact Garage Doors: The North Las Vegas Owner’s Guide
We install and service CWS-compatible impact garage doors and their hardware for North Las Vegas homes, and most complete impact door replacements run roughly $1,900 to $4,600 installed depending on size, series, and wind-rating requirements. If you’re only after a failed part, a section or hardware fix often lands in the $320 to $950 range. Same-day service is possible on common hardware failures when we have a confirmed model match before we roll.
Owners usually discover the problem the same way. A door that used to close with a solid thunk now hesitates halfway down. Or a section that took a glancing hit in a spring windstorm shows a hairline crack the eye catches in the late afternoon light. Sometimes it’s simpler than that: the opener strains, the bottom seal drags, or a neighbor’s identical house closes flush and yours doesn’t anymore. North Las Vegas heat and the desert dust that settles on every track in the valley do their patient work on hinges, rollers, and seals. The good news is that a CWS door is repairable more often than owners expect once you know which part you’re actually holding.
Which CWS Models This Applies To
CWS builds impact-rated garage doors in a range of series and panel styles, and the parts that fail most often are specific to the door line and the wind-load rating. The single biggest compatibility gotcha we run into in North Las Vegas: a “standard” section strut or reinforcement bracket for an unrated door will not align with the load path on a rated CWS door. The mounting points, gauges, and hinge spacing differ. Matching a part by photo or by eye fails more often than it works.
Here’s how to identify what you have before anyone quotes you:
- Find the label. CWS puts a model and series label either on the inside face of the top or bottom section, or on the header above the door. It’s often dusty. Wipe it and photograph it.
- Measure the rough opening, not the door. Width and height, in inches, plus the section height. Section height is the spec that sinks most online part orders.
- Note the impact rating. A rated door and an unrated door of the same look are not the same assembly.
On OEM versus aftermarket: for CWS impact doors, we recommend OEM or OEM-equivalent parts on any load-bearing reinforcement, bracket, or section, because the wind rating depends on the whole assembly working together. For rollers, hinges, and seals, a quality aftermarket part is often just as good and noticeably less expensive. We’ll tell you which side of that line a part sits on before you commit. We’re an independent service provider and not affiliated with CWS.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CWS Impact Garage Doors Is Failing
Impact doors fail differently than standard doors because the panels and hardware are under more load. If you catch these early, North Las Vegas owners usually stay in the repair column instead of the replacement column:
- Hairline cracks along a section seam. Impact-rated steel and composite sections flex under wind load, and repeated flex cracks the seam. A crack this small today is the gap that lets water in next summer.
- The door closes crooked or one side lags. A stretched or worn hinge or a drifted track. On a rated door this is worth a look sooner, because the door needs to seat evenly to hold its wind rating.
- Loud grinding or squealing when it moves. Usually worn rollers or a dry hinge knuckle, made worse by North Las Vegas dust that packs into the track and grits up the bearings.
- The bottom seal sags, tears, or hardens. Our UV index bakes rubber. A hardened seal stops sealing, which means dust, heat, and a draft against the house.
- The opener strains or the door reverses without a visible obstacle. A binding door loading the opener, or a mis-set safety reversal. The second is a safety issue, not just an inconvenience.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what North Las Vegas homeowners typically see from us, with the understanding that the number is firm once we’ve confirmed your CWS model:
- Section replacement, single section: $320 to $700 installed
- Hardware bundle (rollers, hinges, brackets): $280 to $550 installed
- Hinge or bracket spot repair: $180 to $360
- Bottom seal replacement, full width: $220 to $450
- Complete impact door replacement: $1,900 to $4,600 installed
What drives the range: door width (a two-car vs. single-car spread is real), whether you’re on an OEM section or an OEM-equivalent, and whether the track needs re-alignment while we’re in there. The parts cost is on the invoice, the labor is on the invoice, and you get a written price before anything moves. Every job carries our 365-Day Done Right Promise. If a hinge we swapped starts squeaking in eight months, we make it right, no debate.
DIY or Call Us?
What’s safe to check yourself: the label, the rough opening, the section height, whether the door closes flush, and whether the opener’s reversal test works with a block of wood on the floor. Take photos. Note the sound. That’s a real diagnostic and it usually tells us exactly what part you need.
What is not safe: the springs, the cables, and the track realignment. An impact door’s springs are under tension and a mistake there is a hospital visit. We’re not going to dress that up. Springs, cables, and any bracket that ties into the wind-load path should be handled by a trained technician, full stop. We keep shoe covers and drop cloths on every visit, and if the kids are napping we keep the tools quiet. Call (877) 317-4920 and we’ll confirm your CWS model and get you a written price.
FAQs
How long do CWS impact garage door parts last in North Las Vegas? Most CWS hardware (hinges, rollers, seals) lasts eight to twelve years in normal use, but the North Las Vegas heat and dust cut the roller and seal end closer to six to nine on a south-facing door. Rubber and bearings age faster in our UV. Call (877) 317-4920 for an exact quote, estimates are free.
Can a failed CWS door section be repaired instead of replaced? Often yes. A single cracked section with intact brackets and a straight track is a section swap, not a whole-door replacement. If the load path or multiple sections are compromised, we’ll show you why and price both options. Call (877) 317-4920 for a free estimate.
How long does the swap take? A hinge, roller, or bracket repair is typically under two hours. A single section replacement runs three to four hours. A full impact door replacement is usually a full day with a two-person crew. We’ll give you the window before we start.
How do you source the part for my CWS model? We match your CWS label and measurements to the correct series and section height before ordering, which is where most DIY sourcing goes sideways. For load-bearing impact parts we source OEM or OEM-equivalent; for hardware we’ll tell you when aftermarket is the better value. Call (877) 317-4920 and we’ll confirm your model.
If your CWS impact door has a failing part, the fastest way to a real number is to call. Reach us at (877) 317-4920 for a free estimate, and we’ll bring a written price and a clean floor when we come out.
Written by the team at Lightwell Windows & Doors North Las Vegas, serving North Las Vegas and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows & Doors North Las Vegas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.