Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Sliding & Patio Doors: The North Las Vegas Owner’s Guide
We install Therma-Tru-compatible sliding and patio doors in North Las Vegas, and most full replacements run roughly $2,400 to $5,800 installed depending on size, glass package, and frame condition. Spring through early fall is when we get the most calls, because that first 108°F week is when a worn roller, a dragging panel, or a failed weather seal stops being a small annoyance and starts being a problem. Most owners find out when the door suddenly takes two hands to slide, grinds along the track, or lets a hot gust through the edges. Estimates are free and every price is written before we touch anything.
Which Therma-Tru Models This Applies To
Therma-Tru’s sliding patio door line has shifted over the years, so matching the right hardware and glass specification matters more than the brand name on the frame. Older panels may use a different roller housing than current production, and the tempered-glass requirement for a full-height door means a glass swap isn’t something to guess at. If your home was built in the 1990s or 2000s across North Las Vegas, the odds are decent you have an original unit, and the label is your best starting point.
The serial and model label is usually on the door’s edge or the head jamb. Bring us a photo of that label plus a measurement of the rough opening (not just the panel), and we can confirm which generation you’re working with before any order goes out. For Therma-Tru specifically, that label often tells us whether the track profile and roller style are the earlier or later design.
On OEM versus aftermarket: genuine Therma-Tru parts fit the first time and match the glass and finish, but they can mean a wait. Quality aftermarket hardware (rollers, handles, weather stripping) installs faster and costs less, and we’ll tell you honestly where it’s a good substitute and where it isn’t. Glass and frame components we keep to OEM or a verified equivalent. We’re an independent service provider, not affiliated with Therma-Tru, so our recommendation is based on what fits your door, not on moving a particular part. We also service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and ViewLux.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your Therma-Tru Sliding & Patio Door Is Failing
- The panel drags or jumps in the track. Worn rollers or a track packed with desert grit are the usual cause. In North Las Vegas, dust and fine sand settle into the track faster than most people expect, and a roller that spins freely on the bench can seize up once it’s loaded with the panel’s weight.
- The door won’t latch or lock cleanly. A shifted panel, a sagging roller, or a worn keeper. If you have to lift or push to lock it, the panel geometry has moved and the lock is taking the strain.
- Daylight or heat around the edges. Cracked or flattened weather stripping, a failed sweep at the bottom, or dried-out glazing seals. In our heat, these seals age years faster than they would in a mild climate.
- Fogging between the glass panes. The sealed glass unit has lost its gas fill or its desiccant has given out. This is a glass replacement, not a patch, and it usually means the unit is near the end of its service life.
- Water staining or soft wood at the sill. A failed threshold seal or blocked weep holes letting moisture sit. Catch this early and it’s a seal repair; catch it late and it’s framing work.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Typical installed ranges for North Las Vegas break down roughly like this: a standard two-panel slider runs $2,400 – $3,900; a larger three-panel or a wider opening runs $3,900 – $5,800; a glass-unit replacement on an otherwise sound frame runs $600 – $1,400 per panel; and hardware, roller, and weather-seal service runs $180 – $450. What moves the price most is opening size, glass package, frame material, and whether the old unit comes out cleanly or the rough opening needs work.
Every quote we give is line-item and written before work starts, so you see the door, the labor, and any framing or trim separately. The work is covered by the 365-Day Done Right Promise: if it isn’t right, we come back and make it right. Our technicians have up to 16 years of experience, and you’ll know who’s at your door – background-checked and uniformed, shoe covers and drop cloths down, and a photo of the clean-up before we leave. Call (877) 317-4920 for a free estimate.
DIY or Call Us?
There’s a short list of things you can check safely without touching the door itself: photograph the label, clear grit from the track with a vacuum and a soft brush, test the lock gently, and note whether the panel moves smoothly when you lift it slightly. That’s a diagnosis, and it’s useful. What you shouldn’t do is remove a sliding panel on your own. Panels are heavy, tempered glass, and a dropped or swung panel can shatter or crush footing. On a second-story or elevated opening, the risk goes up more. Roller and track work also has a way of revealing that the panel was never sitting level to begin with.
If the door drags, won’t lock, or shows glass or sill trouble, that’s where we come in. We’ll verify the model, quote the work in writing, and protect the floors and furniture while we’re there. Kids and pets in the house are no problem; we keep the work area contained and use pet-safe sealants where there’s a choice. Call (877) 317-4920 and we’ll get it looked at.
FAQs
A well-installed Therma-Tru sliding door typically lasts 20 to 30 years, and the hardware (rollers, seals, handles) often needs attention at the 10-to-15-year mark. Our desert heat and UV exposure push seals and weather stripping to fail earlier than in milder climates, so a seal or roller service around year 12 isn’t unusual here. If your door is showing its age, call (877) 317-4920 for an honest read.
Often, yes. Worn rollers, a dragging track, tired weather stripping, and a sticking lock are usually a service call, not a new door. Fogged glass or a soft, water-damaged sill point toward replacement of the glass unit or the whole panel. We’ll tell you which one you’re facing after we look at it.
A hardware and seal service is usually under two hours. A glass-unit replacement typically takes two to four hours. A full door replacement is generally a one-day job for a standard opening, longer if framing or trim work is needed. We’ll give you a time window with your written estimate.
We match the part to your door using the model and serial label plus an on-site measurement. Where genuine Therma-Tru parts are the right call, we order them; where a verified equivalent performs the same and arrives faster, we’ll say so. Either way, you see the part and the price in writing before we start.
Written by the team at Lightwell Windows & Doors North Las Vegas, serving North Las Vegas and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows & Doors North Las Vegas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.